MACHINERY  &  MAINTENANCE
	The application of CERMET for the Industrial Equipment industry significantly saves energy and resources. The incredible return on investment, achieved within industrial enterprises, are especially evident even through the smallest percentage increase in energy savings, let alone considerable savings. Revitalization of industrial equipment (for example: compressors, press machines, stamping machines, pumps, machine tools…etc.) typically results in a reduction in resources and energy consumption by an average of 10 to 15%.
Not only does CERMET restore your machinery to like new condition, but it will also provide protection and reliability like nothing else. CERMET gives you the security you demand.
	CERMET for Industrial Equipment will recondition your machinery so there is no need for a major overhaul, purchasing spare parts, downtime or expensive labor. Simply put, you don’t need to buy or repair a new machine…you only treat it with CERMET and you’ll get 15% (on average) in utility savings for each machine. In addition, along with treating a machine with CERMET to reduce energy consumption, you will also extend its life and increase its reliability up to 2 to 3 times longer— it's almost like getting a new machine for free!
CERMET reconditions and protects a great variety of equipment and the outlay of treating such equipment can be one-hundredth of the repair and/or replacement costs. In short, virtually everything that is subject to excessive wear due to metal-to-metal friction can be restored, revitalized and protected with the amazing CERMET technology
	CERMET dramatically helps the break-in process of new parts and mechanisms. Revitalization through this break-in period will strengthen the metal parts while protecting and extending the "like-new" life expectancy. CERMET will optimize tolerances of your friction pairs without over-building… it's like getting a custom part every time! , so any oxidation or corrosion is not only cleaned away, but is unable to form after activation. You have one chance to improve and preserve these new assemblies, and CERMET provides this opportunity.
CERMET's ceramic-metal surface is much harder and smoother than normal manufactured metal parts, in turn, reducing friction dramatically. This reduction in friction not only saves on the parts wear and tear, but makes the entire mechanism or drive-train much more efficient. CERMET's new protective layer is the new surface that is now subject to this wear and tear, and not the original metal surface, lasting longer and resisting friction stronger. Your new parts will outlast and outperform all other competitors.
	CERMET’s new surface layer is dielectric and provides an important benefit for new assemblies making them highly corrosive resistant. Treating new parts will not only clean existing corrosion but will virtually eliminate oxidation and any future corrosion, both of which are a new part's worst enemy. CERMET also neutralizes the radical hydrogen ions that cause "brittlization" and accelerate damages within the metal's surface. Using CERMET on brand-new parts in effect inhibits the beginnings of these highly damaging events CERMET is also critical for engines and parts that have been overhauled or reconditioned because during a typical re-build you cannot repeat the steps of in-process surface hardening. When boring, an engine for instance, the upper layer that is especially hardened gets removed. Any overhauled part reduces its life expectancy dramatically and the mechanisms never seem to work like new again. CERMET can repair and restore these parts and mechanisms without mechanical intrusion.
CERMET will also help reduce noise and vibration in new assemblies and can be looked at as an inexpensive solution for many assembly anomalies that can turn into maintenance and repair problems in the future. CERMET is an inexpensive addition to any new assembly with benefits far beyond belief giving you the competitive edge you need.